Computerized Order Placement

Computerized Order Placement

Easy to Operate

Easy to Operate

High Efficiency

High Efficiency

Labor Saving

Labor Saving

Clear Printing

Clear Printing

High Speed Intelligent Printing Slotting Die-cutting Machine

The Ultimate Carton Printing Experience Makes Your Production Faster and Smarte

High Speed Intelligent Printing Slotting Die-cutting Machine

Multi Functions, High Precision

Paper Feed Unit

  • Can feed paper continuously or in increments (with a counter).
  • Leading-edge feeding increases suction flow for smoother and more accurate paper feeding. Frequency conversion controls vacuum airflow and pressure to match cardboard size.
  • Adjustable paper feed stroke reduces pressure on the paper feed roller.
  • The paper feed roller is double-layered, with a soft inner layer and a hard outer layer, maintaining inner elasticity and ensuring a wear-resistant surface.
  • The dust removal device utilizes a special upper suction system and a dedicated fan for efficient dust removal, removing most dust and paper scraps from the paper surface for precise paper feeding.
  • The roller gap and left and right baffle positions are computerized and electrically controlled.
  • The rear paper support is electrically controlled forward and backward for faster setup.
  • A main engine motor startup protection device (the main engine will not start if the machine is not locked).
Paper Feed Unit

Printing Unit

  • Full-process vacuum suction ensures more precise transfer and accurate registration.
  • The plate is mounted on a reel with locking devices on both sides for more accurate plate registration.
  • The anilox roller is equipped with a pneumatic clutch, synchronizing with the main machine speed when the unit is printing.
  • When the unit is not printing, the anilox roller can be stopped to reduce the risk of operator error.The rubber and anilox rollers can be damaged, and when printing separately, they do not need to be synchronized with the main machine speed.
  • A fixed speed difference is set between the rubber and anilox rollers, allowing the rubber rollers to act as scrapers.
  • The printing phase and transverse phase are computerized and electrically controlled.
  • The impression roller and transverse phase are computerized and electrically controlled.
  • The printing phase is fixed with an electromagnetic clutch brake mechanism.
  • When disengaging for phase adjustment or cleaning, the brake mechanism limits gear rotation, maintaining the original gear position.
  • Automatic reset system for plate cleaning.
  • The scraper inking system improves print quality and is easy to operate (optional).
Printing Unit

Large Slotting and Creasing Unit

  • Single-axis dual-blade slotting, with an internal gear structure for carton height, prevents lubricant contamination.
  • Pre-pressing, rough pressing, fine pressing, multiple pressing lines for better carton forming effect.
  • The upper creasing wheel is coated with PU rubber to prevent damage to the cardboard.
  • The slotting toolholder's traverse mechanism uses a lead screw and linear guide for flexible and accurate movement.
  • The upper and lower toolholders are linked by a drive shaft, maintaining alignment during movement and extending tool life.
  • Slotting phase and carton height are computer- and electronically controlled.
  • Pre-pressing, rough pressing line, fine pressing line, slotting tool holder horizontal movement position, computer and electric control.
  • Pre-pressing clearance, creasing clearance, and slotting tool shaft clearance are computer- and electronically controlled.
  • The slotting toolholder's height adjustment features an anti-collision protection device to prevent damage to the machine.
  • The flexible corner cutter mechanism can cut through three- and five-ply cardboard without adjustment, ensuring easy operation.
Large Slotting and Creasing Unit

Die-cutting Unit

  • The rubber pad roller features a mechanical spiral reversing mechanism with a 50mm horizontal movement.
  • The die-cutting phase is computerized and electrically controlled.
  • The horizontal phase is computerized and electrically controlled, with a ±10mm control range.
  • The gap between the rubber pad roller and the die-cutting roller is computerized and electrically controlled.
  • The transfer roller adjustment is computerized and electrically controlled.
  • The rubber pad roller compensation is driven by an independent motor, with a ±3mm compensation range.
  • The rubber pad roller features a cutting and leveling mechanism to maintain a smooth rubber pad surface.
Die-cutting Unit

Machine Features

Machine Features 主图

The entire machine utilizes internationally advanced design concepts, conforming to European manufacturing standards and drawing on YBL's years of production experience.

1

High-quality materials are used, with drive rollers made of high-quality steel, hard chrome-plated, and surface-ground.

2

Drive gears are forged from 20CrMnTi high-quality alloy steel, carburized, and ground to a Rockwell hardness of HRC > 60°.

3

The gap adjustment for the drive rollers, embossing roller, rubber roller, and anilox roller is electrically controlled.

4

Automatic zeroing and reset are provided.

5

An independent computer control console allows for the storage of frequently used orders, enabling quick order changes and convenient operation.

6

Each unit of the machine automatically or individually detaches, and a continuous alarm sounds during operation to ensure operator safety.

7

Technical Parameters

Model92092412241228162816321636
Max. Speed(sheets/min)320300280260180180160
Max. Paper Feed Size( mm)900×2000900×24001200×24001200×28001600×28001600×32001600×3600
Min. Paper Feed Size( mm)300×600300×600350×600350×600450×600450×600450×600
Feeding Paper by Sheets(mm)1200×20001200×24001500×24001500×8002000×28002000×32002000×3600
Max. Printing Area(mm)900×1960900×23601200×23601200×27601600×27601600×31601600×3560
Min.Slotting Interval( mm)Straight Knife130×130×130×130
Back Knife230×65×230×65
Max. Slotting Depth(mm)250250300300400400400